Previous
Robots can be easily constructed from aluminum, steel, tin, wood, plastic, paper, foam, or a combination of them all. Here are some common materials used in constructing robot bases and other...
To obtain the required motion of the robot according to its application and the purpose that the robot has being developed, commonly there are several steering methods used.
When working with robots you will always need portable power sources. Therefore use of batteries is more....
Besides a screwdriver, the most important tool to the robot builder is the volt-ohm meter. This device is also called a multitester, and for good reason: It’s used to test all sorts of electrical...
More and more research activities of mobile robots are focused on the design and the control of mobile robot systems. The design strongly depends on the application: indoor or outdoor, in a...
The purpose of carbon brushes is to reduce wear on the commutator, compared with what metal brushes would do. In many cases, carbon brushes can be made long enough that they will not wear out
Fully autonomous robot has to pick up black/white cubes from a 2m encircled area, and find the exit T-junction on the periphery, and travel to the unloading area. There are two separate unloading...
Next
Building Hardware
Materials for building Robot Bodies
Gadget Reviews
Common Steering Methods used in...
Batteries
Which battery to use for mobile...
Equipment
Comparison of Multimeters Meters/...
Mobile Robots
Mechanical design methodology of...
Motors
Purpose of carbon brushes in motors
Sri Lanka
Robot Competition 2010, University...
Latest News
-
Sri Lanka wins Techfest iNexus 2012
The much anticipated Techfest iNexus 2012 international robotics challenge was successfully secured by Sri Lanka. -
Robot Competition 2009, University...
Completion required the students to build a robot capable of putting out fire in a given areas with a known map. The competition is a part of the elective credit course EN2060... -
Robot Competition 2010, University...
Fully autonomous robot has to pick up black/white cubes from a 2m encircled area, and find the exit T-junction on the periphery, and travel to the unloading area. There are two... -
Robot Competition 2011, University...
This video shows the Champion of the Annual Robot Competition 2011 of the University of Moratuwa Sri Lanka. This competition is part of EN2532, a course module offered by the... -
Robot Teachers now in Schools
EngKey, teaching robots were designed to help students with pronunciation of the English language while providing students -
iNexus 2011 – Sri Lanka
iNexus 2011 -Sri Lanka Competition, first place was secured by a team from University of Moratuwa. -
Robots as Bodyguards
Bodyguarding...or protecting some else's life before yours, is kind of a routinely, extremely boring, extremely dangerous job.As I have pointed out, ROBOTS for BODYGUARDS should... -
Robotics Servo motor tutorial
Robotics Servo motors are controlled by sending them a pulse of variable width. Robotics servo motors don't require lot of torque generally. Torque may vary from 3kgcm to 30 kgcm. -
PIC Bootloaders
A bootloader is a program that stays in the microcontroller and communicates with the PC (usually through the serial interface). The bootloader receives a user program from the PC... -
Short circuiting terminals of DC...
When a short circuit is applies to a DC motor's terminals the rotor and any attached load will be braked rapidly. "Rapidly" is system dependant
Copyright © Robotonomous 2012. All rights reserved.
Powered by WordPress. Designed by 